EN RU

Tamron 18-300mm F3.5-6.3 Di III-A VC VXD — depth of field calculator

The Tamron 18-300mm F3.5-6.3 Di III-A VC VXD is a zoom lens for the Third-Party (Various Mounts) system with a focal length of 18–300mm, a maximum aperture of f/3.5–6.3 and a minimum aperture of f/22. Below is a ready-to-use depth of field (DoF) calculator and tables for typical shooting distances, computed with the same formulas as the PhotoSim app.

Download for Android (APK) v1.0.0 · Android 6.0+ · works offline

Key numbers

Depth of field table

Distances are measured from the sensor plane. Each cell shows the near and far limit of acceptable sharpness in metres (∞ = to infinity). Circle of confusion = sensor diagonal / 1500.

18 mm

ApertureHyperfocal1 m2 m3 m5 m10 m
f/3.54.94 m0.83–1.251.43–3.341.87–7.572.49–∞3.31–∞
f/44.33 m0.81–1.291.37–3.691.78–9.662.32–∞3.02–∞
f/5.63.09 m0.76–1.461.22–5.561.53–82.31.92–∞2.37–∞
f/82.17 m0.69–1.831.05–22.91.26–∞1.52–∞1.79–∞
f/111.58 m0.62–2.630.89–∞1.04–∞1.21–∞1.37–∞
f/161.09 m0.53–9.700.71–∞0.81–∞0.90–∞0.99–∞
f/220.80 m0.45–∞0.58–∞0.64–∞0.69–∞0.74–∞

70 mm

ApertureHyperfocal1 m2 m3 m5 m10 m
f/465.2 m0.99–1.011.94–2.062.87–3.144.65–5.418.68–11.8
f/5.646.6 m0.98–1.021.92–2.092.82–3.204.52–5.598.24–12.7
f/832.6 m0.97–1.031.89–2.132.75–3.304.34–5.897.67–14.4
f/1123.8 m0.96–1.041.85–2.182.67–3.424.14–6.317.05–17.2
f/1616.4 m0.95–1.061.79–2.272.54–3.653.84–7.166.22–25.5
f/2211.9 m0.93–1.081.72–2.392.41–3.983.54–8.535.45–60.0

300 mm

ApertureHyperfocal1 m2 m3 m5 m10 m
f/6.3760 m1.00–1.002.00–2.002.99–3.014.97–5.039.87–10.1
f/8599 m1.00–1.001.99–2.012.99–3.014.96–5.049.84–10.2
f/11435 m1.00–1.001.99–2.012.98–3.024.95–5.059.78–10.2
f/16299 m1.00–1.001.99–2.012.97–3.034.92–5.089.69–10.3
f/22218 m1.00–1.001.98–2.022.96–3.044.89–5.119.57–10.5

FAQ

What is the depth of field of the Tamron 18-300mm F3.5-6.3 Di III-A VC VXD at f/4 and 3 m?

At 70mm, f/4 and focus at 3 m, acceptable sharpness runs from 2.87 to 3.14 m — about 27 cm in total.

What is the hyperfocal distance of the Tamron 18-300mm F3.5-6.3 Di III-A VC VXD?

At 70mm and f/8 on a APS-C sensor the hyperfocal distance is about 32.6 m. Focus there and everything from 16.3 m to infinity is sharp.

How do I get more background blur with the Tamron 18-300mm F3.5-6.3 Di III-A VC VXD?

Open the aperture to f/4, move closer to your subject and increase the distance between subject and background, and zoom in to the long end. You can check the result in the calculator above.

Other lenses