EN RU

Sigma 100-400mm F5-6.3 DG DN OS — depth of field calculator

The Sigma 100-400mm F5-6.3 DG DN OS is a zoom lens for the Third-Party (Various Mounts) system with a focal length of 100–400mm, a maximum aperture of f/5–6.3 and a minimum aperture of f/22. Below is a ready-to-use depth of field (DoF) calculator and tables for typical shooting distances, computed with the same formulas as the PhotoSim app.

Download for Android (APK) v1.0.0 · Android 6.0+ · works offline

Key numbers

Depth of field table

Distances are measured from the sensor plane. Each cell shows the near and far limit of acceptable sharpness in metres (∞ = to infinity). Circle of confusion = sensor diagonal / 1500.

100 mm

ApertureHyperfocal1 m2 m3 m5 m10 m
f/569.4 m0.99–1.011.95–2.062.88–3.134.67–5.388.75–11.7
f/5.662.0 m0.99–1.011.94–2.062.87–3.154.63–5.438.62–11.9
f/843.4 m0.98–1.021.92–2.092.81–3.214.49–5.648.14–13.0
f/1131.6 m0.97–1.031.89–2.132.75–3.304.33–5.927.62–14.6
f/1621.8 m0.96–1.041.84–2.192.65–3.464.08–6.456.87–18.3
f/2215.9 m0.95–1.061.79–2.272.54–3.673.82–7.246.16–26.6

200 mm

ApertureHyperfocal1 m2 m3 m5 m10 m
f/5.4257 m1.00–1.001.99–2.012.97–3.034.91–5.109.63–10.4
f/5.6248 m1.00–1.001.99–2.012.97–3.034.91–5.109.62–10.4
f/8174 m1.00–1.001.98–2.022.95–3.054.87–5.149.47–10.6
f/11126 m0.99–1.011.97–2.032.93–3.074.82–5.209.28–10.8
f/1686.9 m0.99–1.011.96–2.042.91–3.104.74–5.298.99–11.3
f/2263.2 m0.99–1.011.94–2.062.87–3.144.65–5.418.66–11.8

400 mm

ApertureHyperfocal1 m2 m3 m5 m10 m
f/6.3881 m1.00–1.002.00–2.002.99–3.014.97–5.039.89–10.1
f/8694 m1.00–1.002.00–2.002.99–3.014.97–5.039.86–10.1
f/11505 m1.00–1.001.99–2.012.98–3.024.95–5.059.81–10.2
f/16347 m1.00–1.001.99–2.012.98–3.024.93–5.079.73–10.3
f/22253 m1.00–1.001.99–2.012.97–3.034.91–5.099.63–10.4

FAQ

What is the depth of field of the Sigma 100-400mm F5-6.3 DG DN OS at f/5.4 and 3 m?

At 200mm, f/5.4 and focus at 3 m, acceptable sharpness runs from 2.97 to 3.03 m — about 7 cm in total.

What is the hyperfocal distance of the Sigma 100-400mm F5-6.3 DG DN OS?

At 200mm and f/8 on a Full Frame sensor the hyperfocal distance is about 174 m. Focus there and everything from 86.8 m to infinity is sharp.

How do I get more background blur with the Sigma 100-400mm F5-6.3 DG DN OS?

Open the aperture to f/5.4, move closer to your subject and increase the distance between subject and background, and zoom in to the long end. You can check the result in the calculator above.

Other lenses