EN RU

Canon RF-S 18-150mm F3.5-6.3 IS STM — depth of field calculator

The Canon RF-S 18-150mm F3.5-6.3 IS STM is a zoom lens for the Canon RF-S (APS-C) system with a focal length of 18–150mm, a maximum aperture of f/3.5–6.3 and a minimum aperture of f/22. Below is a ready-to-use depth of field (DoF) calculator and tables for typical shooting distances, computed with the same formulas as the PhotoSim app.

Download for Android (APK) v1.0.0 · Android 6.0+ · works offline

Key numbers

Depth of field table

Distances are measured from the sensor plane. Each cell shows the near and far limit of acceptable sharpness in metres (∞ = to infinity). Circle of confusion = sensor diagonal / 1500.

18 mm

ApertureHyperfocal1 m2 m3 m5 m10 m
f/3.54.94 m0.83–1.251.43–3.341.87–7.572.49–∞3.31–∞
f/44.33 m0.81–1.291.37–3.691.78–9.662.32–∞3.02–∞
f/5.63.09 m0.76–1.461.22–5.561.53–82.31.92–∞2.37–∞
f/82.17 m0.69–1.831.05–22.91.26–∞1.52–∞1.79–∞
f/111.58 m0.62–2.630.89–∞1.04–∞1.21–∞1.37–∞
f/161.09 m0.53–9.700.71–∞0.81–∞0.90–∞0.99–∞
f/220.80 m0.45–∞0.58–∞0.64–∞0.69–∞0.74–∞

50 mm

ApertureHyperfocal1 m2 m3 m5 m10 m
f/4.231.7 m0.97–1.031.88–2.132.74–3.314.32–5.937.61–14.6
f/5.623.8 m0.96–1.041.85–2.182.67–3.424.14–6.317.05–17.2
f/816.7 m0.95–1.061.79–2.262.55–3.653.86–7.116.26–24.8
f/1112.1 m0.93–1.081.72–2.382.41–3.963.55–8.445.49–55.5
f/168.36 m0.90–1.131.62–2.612.22–4.643.14–12.34.57–∞
f/226.09 m0.87–1.181.52–2.942.02–5.822.76–26.73.80–∞

150 mm

ApertureHyperfocal1 m2 m3 m5 m10 m
f/6.3190 m1.00–1.001.98–2.022.96–3.054.88–5.139.51–10.5
f/8150 m0.99–1.011.98–2.032.94–3.064.84–5.179.38–10.7
f/11109 m0.99–1.011.97–2.032.92–3.084.79–5.239.17–11.0
f/1674.9 m0.99–1.011.95–2.052.89–3.124.70–5.358.84–11.5
f/2254.5 m0.98–1.021.93–2.072.85–3.174.59–5.498.47–12.2

FAQ

What is the depth of field of the Canon RF-S 18-150mm F3.5-6.3 IS STM at f/4.2 and 3 m?

At 50mm, f/4.2 and focus at 3 m, acceptable sharpness runs from 2.74 to 3.31 m — about 56 cm in total.

What is the hyperfocal distance of the Canon RF-S 18-150mm F3.5-6.3 IS STM?

At 50mm and f/8 on a APS-C sensor the hyperfocal distance is about 16.7 m. Focus there and everything from 8.33 m to infinity is sharp.

How do I get more background blur with the Canon RF-S 18-150mm F3.5-6.3 IS STM?

Open the aperture to f/4.2, move closer to your subject and increase the distance between subject and background, and zoom in to the long end. You can check the result in the calculator above.

Other lenses